Network infrastructure that's installed right — and proven.
Cat6/Cat6A cabling, fiber fusion splicing and Fluke Networks certification testing for offices, warehouses, industrial sites and multifamily buildings across San Diego and Orange County.
- Every copper link Fluke-certified, with test reports
- Fiber fusion splicing with loss and OTDR testing
- Complete infrastructure: pathways, racks, power and grounding
- Labeled, documented and handed over to your IT team
Get your cabling quote
Free site survey. We reply within one business day.
Everything between the internet and every device
One contractor for the cable, the fiber, the racks, the pathways and the power behind them — so nothing falls between trades.
Structured cabling
Cat6 and Cat6A voice and data drops, PoE runs and consolidation points.
Fiber optic backbone
Single-mode and multimode fiber between floors, buildings and IDFs.
Fusion splicing & testing
Fusion-spliced terminations with optical loss and OTDR test reports.
Fluke certification
Every copper link certified to TIA standards, with PDF test reports.
Racks, MDF & IDF build-outs
Racks, cabinets, ladder rack, patch panels and cable management.
Power & grounding
Dedicated circuits, UPS power and telecom grounding and bonding.
Pathways
Conduit, J-hooks, cable tray and firestopping at rated penetrations.
Wi-Fi, cameras & PoE devices
Cabling and mounting for access points, cameras, phones and sensors.
Labeling & documentation
Labeled ends, cable schedules and as-builts for your IT team.
Moves, adds & changes
Tenant moves, new workstations and closet clean-ups.
Outside plant & building-to-building
Underground and aerial runs between buildings on a campus.
Audio-visual & conference rooms
Cabling for displays, conferencing and paging.
Clean racks. Labeled ends. No mystery cables.
We design and install Cat6 and Cat6A cabling to TIA standards — from the patch panel to the wall plate — with color-coded, dressed patching your IT team will actually enjoy working in.
- Cat6 / Cat6A voice, data and PoE drops
- Patch panels, racks, cabinets and horizontal and vertical cable management
- Pathways: J-hooks, conduit, cable tray and firestopping
- Labeling on both ends and a full cable schedule
- Closet clean-ups and abandoned cable removal
Fiber fusion splicing and testing
Backbones between floors, IDFs and buildings run on fiber. We install, fusion splice and terminate single-mode and multimode fiber, then test every strand so you have proof — not promises.
- Single-mode and multimode backbone and building-to-building runs
- Fusion-spliced pigtails and cable-to-cable splices
- Fiber enclosures, cassettes and patch panels
- Tier 1 optical loss testing and Tier 2 OTDR traces
- Inspected and cleaned connectors before hand-over
Every link tested. Every result on paper.
Visual checks and simple continuity testers can't tell you if a cable will carry 10 Gb/s. Certification can. We test each installed link with a Fluke Networks certification tester against TIA performance limits and deliver the reports.
- Copper certification to Cat6 / Cat6A permanent-link limits
- Fiber loss and OTDR results for every strand
- PDF reports organized by closet and panel
- Supports cable manufacturers' extended warranty requirements
- Certification of existing cabling before upgrades or moves
| CL-1A-01 | Cat6A | 3.2 dB | PASS |
| CL-1A-02 | Cat6A | 2.9 dB | PASS |
| CL-1A-03 | Cat6A | 3.4 dB | PASS |
| CL-1A-04 | Cat6A | 3.1 dB | PASS |
| FB-MDF-IDF2 · 01 | SM fiber | 0.41 dB | PASS |
Power and data from one contractor
Network closets need dedicated circuits, UPS power and proper grounding as much as they need cable. As a licensed C-10 electrical contractor, CL Electric installs both — so your IT, electrical and security work arrives on one schedule, with one point of contact.
- ✔ Licensed, bonded and insured — CSLB C-10 #1123510
- ✔ Cabling for cameras and access control in the same project
- ✔ After-hours work to keep your network up
- ✔ Test reports and as-builts on every job
Offices & TIs
New build-outs, moves and expansions.
Warehouses & industrial
Wi-Fi coverage, scanners, cameras and fiber between buildings.
Multifamily & HOA
Resident networks, intercoms and common-area Wi-Fi.
Schools & public
DIR-registered for prevailing-wage projects.
From site survey to certified hand-over
Site survey
We walk the space, closets and pathways with your IT contact.
Design & quote
Drop locations, cable type, rack layout and a fixed price.
Install
Pathways, cable, fiber, racks and terminations — dressed and labeled.
Test & certify
Fluke certification for copper, loss and OTDR tests for fiber.
Hand-over
Reports, cable schedule and as-builts delivered to your team.
Network cabling across San Diego and Orange County
CL Electric installs structured cabling and fiber for businesses and properties throughout San Diego County and Orange County, including:
San Diego County
- San Diego
- Carlsbad
- Oceanside
- Escondido
- San Marcos
- Vista
- Poway
- Kearny Mesa
- Sorrento Valley
- Miramar
- Otay Mesa
- Chula Vista
- El Cajon
- La Jolla
Orange County
- Irvine
- Santa Ana
- Anaheim
- Costa Mesa
- Newport Beach
- Tustin
- Lake Forest
- Huntington Beach
- Fullerton
- Brea
- Orange
- Mission Viejo
Common questions
Planning a move, build-out or network upgrade?
Book a free site survey — we'll bring a design, a fixed price and a testing plan.